Pump Sena 1/3CV

Print

  • New generation pump range.

  • With power ratings from 1/3 HP to 1.25 HP in single-phase motors and from 3/4 HP to 1.25 HP in three-phase motors.

  • GS marking. Motor protection IP-55, insulation.

  • Class F, AISI-316 in all those parts in direct contact with water.

  • Connections to pipes by means of a 50 mm diameter glueing sleeve.

  • Flow rates in l/h at 6 m.c.a. for 0.33 HP, at 8 m.c.a. for 0.5 HP and at 10 m.c.a. for the rest of the range. 3,000 rpm.

Sales price 334,50 €
Description
  • Pool pump 1 HP three-phase.
  • Flow rate 12.800 l/h 0,63 Kw 230/400 V.

SENA pump.

The Sena atralpool pumps work at full capacity with an optimum sound level for all models, so that the perceived sound effects in the pool environment are minimised. They incorporate the bayonet fitting in their pre-filter cover, which allows the pump pre-filter to be closed in one single movement in four different positions.

The cross configuration of the pre-filter cover allows any tool to be used to open or close it.

Technical characteristics:

  • GS marking. Motor protection IP-55, insulation. Class F, AISI-316 in all those parts in direct contact with water.
  • Connections to pipes by means of a 50 mm diameter glueing sleeve.
  • Flow rates in l/h at 6 m.c.a. for 0.33 HP, at 8 m.c.a. for 0.5 HP and at 10 m.c.a. for the rest of the range. 3,000 rpm.
  • Pump screws in stainless steel.
  • Connection fittings for suction and delivery of 1.5″ for Ø 50mm sleeve. - Mechanical seal manufactured in AISI 316. Impeller in NORYL (R).
  • Pump body and diffuser made of polypropylene with mineral charge and fibreglass.
  • Class F insulation and IP-55 motor protection allow them to work in environments with high humidity and high temperatures.
  • Self-priming capacity above 2 m.
  • Standard range at 50 Hz, also available at 60 Hz.

Description of the pump components:

 

Dimensions

 

© 2018 ABC Pool Palmera S.L. All rights reserved. Design by OlivaViva