Pump Sena 3/4CV

Print

  • The Sena AstralPool is a self-priming pool pump that offers quality at the best price.

  • Maximum flow and low noise level.

  • Made of technical plastics with a 2 litre capacity prefilter, with a transparent lid that allows the inside of the prefilter to be visualised.

  • Available from 1/3 HP to 1.25 HP with single-phase motors, and from 3/4 HP to 1.25 HP with three-phase motors.

  • Single-phase: 230 V II (common in domestic electrical installations) / Three-phase: 230/400 V III. If you are unsure, consult your electrician.

Sales price 299,00 €
Description

Characteristics

  • Pump screws in stainless steel.
  • Connection fittings for suction and discharge 1.5" for Ø 50 mm sleeve.
  • Mechanical seal made of AISI 316.
  • Impeller in NORYL®.
  • Pump body and diffuser made of polypropylene with mineral charge and fibreglass.
  • Class F insulation and IP-55 motor protection allow them to work in environments with high humidity and high temperatures.
  • Self-priming capacity above 2 m.
  • Standard range at 50 Hz, also available at 60 Hz.

Benefits

Low sonority. The Sena pumps work at full capacity with an optimum sound level for all models, so that the perceived sound effects in the pool environment are minimised.

Practical design. The entire Sena pump range has a bayonet fitting on the pre-filter cover, which allows the pump pre-filter to be closed in four different positions in one single movement. The cross configuration of the pre-filter cover allows any tool to be used to open or close it. Also, to fix the foot to the pump body, a very stable and easy to assemble foot has been chosen, eliminating the screws as one of its components.

Performance curves

Description of the pump components:

 

Dimensions

 

© 2018 ABC Pool Palmera S.L. All rights reserved. Design by OlivaViva